This 65-inch LG G6 wall mounting in Battersea, SW11, used the original LG flush bracket supplied with the television. The dot-and-dab wall had a concrete block behind it, an existing socket sat right where the screen needed to go, and the television had to be centred precisely inside a moulded panel.
Battersea, Wandsworth · SW11
65-inch LG G6 OLED, 2026 model
Dot-and-dab plasterboard, approximately 4cm gap, concrete block behind
Original LG flush wall bracket, supplied with the television
Four LG-supplied fixings into the concrete block, combined with two metal plasterboard fixings
Existing socket and back box recessed deeper into the wall
Television power only, using the recessed socket behind the screen. No HDMI, Ethernet, aerial or optical cables connected.
TV Mount Mate
This 65-inch LG G6 OLED was mounted on a dot-and-dab wall in Battersea using the original LG flush bracket. The fixing layout was adapted to the plasterboard and concrete block construction, while the existing socket was recessed so the television could sit close to the wall and remain centred within the decorative moulded panel.
The wall consisted of dot-and-dab plasterboard with an approximately 4cm gap and solid concrete block behind. The available fixing positions were checked before the original LG bracket was installed.
Four LG-supplied fixings were taken through to the concrete block, with two metal plasterboard fixings completing the bracket layout and providing suitable support across the available positions.
The existing socket sat directly behind the planned television position and would have prevented the LG G6 from sitting close to the wall. The socket and back box were recessed deeper into the wall to create the required clearance.
The LG G6 was positioned precisely within the decorative moulded panel. Recessing the socket allowed the original LG flush bracket to work as intended, producing a clean, close-to-wall finished installation.
Send your postcode, TV make, model and size, a wall photograph and your bracket details if available. See our TV mounting service or get in touch for a fixed quote. No deposit. Payment on completion. Call 07944 499585.
Explore more dot-and-dab wall TV mounting projects completed with careful wall checks, suitable fixings and neat cable routing for a secure, clean finish.
The original Samsung Slim Fit mount was suitable, but an uneven wall surface first had to be sanded so the Frame could sit flush. Four GripIt fixings were used, with the One Connect box housed inside the cabinet.
Five fixing points through new dot-and-dab plasterboard into solid block, with a central power point, three concealed HDMI routes to a Sky box, Apple TV and Sonos Beam, and the screen centred within decorative wall moulding.
The television was centred for the main viewing position, with a recessed socket behind it allowing the original LG bracket to sit close to the wall without covering the existing connection plates below.
